Warning message

Mean Menu style requires jQuery library version 1.7 or higher, but you have opted to provide your own library. Please ensure you have the proper version of jQuery included. (note: this is not an error)

Care and Cleaning of EIT Instruments

EIT radiometers are used to design, measure and control industrial UV applications in a wide variety of locations. The environmental conditions that our instruments are exposed to vary from pristine (medical clean room) to challenging (wood manufacturing facility). Careful cleaning of the outer optics using the guidelines described will help your EIT instrument perform as designed between service intervals at EIT.

The guidelines are general and specific questions should be directed to EIT (uv@eit.com).

Instruments that stop functioning when accidently dropped, get stuck in equipment or wind up covered or immersed with the product being cured need to come back to EIT for further evaluation using a Service Request Form found under Customer Service & Support. (Include a link to Service Request Form already posted on web site)

EIT General Cleaning Guidelines

EIT® INSTRUMENT CLEANING GUIDELINES

Cleaning instrument with EIT Instrument Wipes

EIT has sourced an industrial grade wipe that can be used for cleaning the optics on our UV measurement products. The Instrument Wipe contains a fast evaporating, mild solvent for cleaning EIT optics. The wipe is non-linting, non-abrasive and does not contain any detergents or surfactants that can harm the optics. Each wipe stays sealed until used to prevent contamination of the cleaning solution. 

 

EIT Instrument Wipes

Post PDF of Safety Data Sheet

See the You Tube Video of cleaning EIT instruments with EIT  Instrument Wipes below

Cleaning with IPA Alcohol

EIT instruments may also be cleaned using isopropyl alcohol (IPA) following the techniques described in the EIT General Cleaning Guidelines

See the You Tube Video of cleaning EIT instruments with IPA below

Videos