3DCURE™ | UV POWERMAP and UV MAP PLUS | MICROCURE | UV POWER PUCK FLASH
UVICURE PLUS II and UV POWER PUCK II | UVIMAP | UVIRAD | SPOTCURE | PALM PROBE
|
|
3DCURE™
3DCURE™ Sensors:
- Multiple measurement points - up to 32 sensors!
- Small, low profile Sensor with cosine response, each
calibrated and serialized.
- Individual Sensors are single band and are available in any of EIT's four standard (UVA, UVB, UVC or UVV) bandwidths. The sensors can be combined in any combination of bandwidths to meet the measurement needs of your UV source(s) and process.
- Sensors are easily attached on either a permanent or a temporary basis.
- Flexible daisy-chained quick connector system allows
the Sensors to be placed exactly where they are needed
without creating an octopus maze of cables.
- An LED on each Sensor can be toggled via software
to easily identify its location on the work piece.
Data Collection Module (DCM) / EIT Cure3D Software:
- The Data Collection Module (DCM) is small (4.5"L x
2.75"W x 0.8"H; 11.43 x 7.0 x 2.03cm), durable, portable;
uses rechargeable batteries that provide power to the
Sensors.
- The DCM attaches to the daisy-chained (multidrop) Sensors and travels through the process.
- The DCM stores the collected data from up to 32 sensors and transfers s digital data file to a computer via EIT Cure3D software.
- The Cure3D software displays the energy density (joules/cm2) and irradiance (watts/cm2) values, plus other pertinent information in table format from each Sensor in the chain.
- The data can be easily exported into a spreadsheet
program such as Excel® to allow analysis
and sharing of the data. ActiveX® controls
are available to allow end users to manipulate the data
in their particular format.
- The DCM with the attached Sensors can also be used in a tethered mode to a computer for instantaneous readings and feedback for immediate adjustment of UV lamps.
Download pdf of this brochure
|
|
|
UV
POWERMAP and UV MAP PLUS
- UV PowerMAP measures peak irradiance and total
energy density in four spectral regions: UVA, UVB, UVC,
and UVV
- UV MAP Plus measures the peak irradiance and
total energy density for any one channel
- Collection and storage of up to 1 million data points
for accurate UV and temperature mapping in your system
- Collected data displayed in graphical and tabular
forms in the PowerView software package
- Ultra-fast, user-adjustable sampling rate - up to
2048 samples/second - ensures high resolution even at
high speeds
UV
PowerMap and UV MAP Plus Technical Specifications
PowerView
Troubleshooting guide(pdf).
Download pdf of this brochure
|
|
|
MICROCURE
- Microprocessor-based, battery-powered miniature UV radiometer
- Small Size: 1.3"L x 1.0"W x 0.25"T (33.0mm x 25.4mm x 6.4mm)
- Designed to measure UV dose in web printing, container curing, any tight access UV curing application
- Fast sample rate - 2000 per second
MicroCure Technical Specifications
Download pdf of this brochure
|
|
|
UVICURE PLUS II and UV POWER PUCK II
- Curing applications of inks, adhesives, solder masks, and epoxies (not for use in web press applications)
- Measure lamp performance
- Compares the efficiencies of different UV curing systems
- Compare any current reading to chosen baseline reference to compare your system over time
- Establish UV level for proper curing
UV
Power Puck Technical Specifications
Download pdf of this brochure
|
|
|
UVIMAP
- This product has been superceded by the UV PowerMap and the UV MAP PLUS
- Service is still available.
UVIMAP Technical Specifications
|
|
|
UVIRAD
- Used in plate exposure or "burning-in" of screens
- Incorporates one UV spectral response range
- Displays readout of total UV energy density in milliJoules/cm2
- Provides convenient way to measure the total UV energy striking a workpiece
- Identifies "cold" and "hot" spots to enhance even exposure
- Rounded edges allows placement under the vacuum frame
UVIRAD
Technical Specifications
Download pdf of this brochure
|
|
|
UV Power Puck® Flash
- Specifically for measuring pulsed UV light
- Combines compact size and robust design to withstand the extremes of UV curing production environments
- Provides accurate and repeatable measurements
UV Power Puck® Flash Technical Specifications
Download pdf of this brochure
|
|
 |
SPOTCURE
- Monitors the output of a UV "spot curing" system
- Provides indication of light guide degradation and spot curing system degradation
- Standard range version measures UV irradiance up to 19.99 Watts/cm2
- Extended range version measures UV irradiance up to
99.9 Watts/cm2
- Includes several different size light guide adaptors for maximum flexibility
SpotCure
Technical Specifications
Download pdf of this brochure
|
|
 |
PALM
PROBE
- Measure UV system performance particularly in applications
where measurement space is limited or it is difficult
to establish.
- Establish, document and maintain UV process windows.
- Measures UV irradiance up to 10 Watts/cm2
- Wide dynamic range (100,000:1) allows multiple uses
from production curing (high irradiance) to stray hazard
(low irradiance) applications.
- Single hand operation.
- Meet ISO, quality and customer requirements for SPC/SQC.
Download pdf of this brochure
|
