|
How To Interpret the UVIMAP Printout
- Total UV Energy - This is the area under the curve and is expressed in Joules/ cm2
- Peak UV Intensity - This is the numeric value of the highest intensity that was measured. This is expressed in W/cm2
- UV Average Intensity - This is the sum of all the UV intensity data samples divided by the number of samples taken
- Sample Rate - The sample rate that was used in the measurement
- Number of UV Samples - The number of samples taken during an individual run
- Peak Temperature - The peak temperature detected by the thermocouple during the pass. It is expressed in degrees C
- Internal Temperature - This is the internal temperature of the UVIMAP. This is printed out in order to protect UVIMAP against overheating
- Mode - Tells you whether the data collection mode was in Manual or Automatic. The UVIMAP begins taking samples immediately in Manual Mode and at 2% of the top range selected in Automatic Mode
- (Space at the bottom of the summary) - This allows you to make notes about the measurement - for example, date, name of installation, conveyor speed, identification which might make it easier for later comparisons
* Specifications are subject to change. EIT will not be responsible for discrepancies due to typographic errors.
Return to Technical Product Notes
|
EIT, Inc., 108 Carpenter Drive, Sterling, VA 20164
Phone: 703-478-0700 · Fax: 703-478-0815Questions, problems, comments? Contact webmaster@eitinc.com
All contents © 1998 EIT Inc. except where noted. All rights reserved.
Last updated
|